|
ENGFit Assessment Modules
- Pipeline external damage-gouge to EPRG
- Fatigue of welded joints to BS 7608
- Susceptibility of brittle fracture to Section 3 API RP 579
- General metal loss to API RP 579
- Local metal loss to Section 4 API RP 579
- Local metal loss to Section 5 API RP 579
- Pitting metal loss to API RP 579
- Blisters to API RP 579
- Laminations to API RP 579
- Shell distortions to API RP 579
- Weld misalignment to API RP 579
- Crack-like flaws to API RP 579
- Local metal loss to BS 7910
- Local metal loss to ASME B31.G
- Furnace tube assessment to API 530
- ASME minimum thickness to API RP 579
FEATURES AND BENEFITS
- A wide range of assessment types for different damage mechanisms affecting critical equipment.
- Calculation of critical flaw dimensions, safe continued operating loads to applicable international standards.
- Assessment management based on equipment with possible multiple assessments for each piece of equipment.
- Allows the determination of limiting conditions for design, operation and life extension of the assessed component.
- High quality output (hardcopy and PDF) for integrating into your final reports without any further effort.
- Includes worked examples for all fitness for service assessment modules for ease of learning for engineers new to FFS or requiring a refresher.
- Used by major operators and engineering consultants in the oil and gas, petrochemical and power industries
- TWI provides consultancy support and practical advice for its software tools, from leading authors of the world's best FFS standards.
- Friendly screen design and clear help guidance, for ease of use for engineers at all levels
- Website support is available at via the Support Forum
|
